| Stay informed, join our email list for exclusive offers! |
Smart Parts Impulse - Black / Gold Dust
Smart Parts Impulse - Black / Gold Dust
What barrel thread pattern does the Impulse use?
The same thread pattern that was introduced with the Classic Impulse. Because this is now the thread pattern used on all Smart Parts markers, it is now simply referred to as Smart Parts threading.
How much does the Impulse weigh?
Weight of the Impulse is approximately 2.1 pounds.
Can the Impulse be upgraded with a tapeworm mod?
The Tapeworm Mod was a popular upgrade for the Classic Impulse, however it is not necessary on the new Impulse because it already features dual-stage regulation.
If spool valves are so great, why make a poppet valve marker?
Some players like the feel of a spool valve marker, while some prefer a poppet. Regardless of their preference, all players are looking for performance – that's where the Impulse delivers.
Does the release of the new Impulse mark the end of the Shocker product line?
No. In fact, this new product release proves that the Shocker SFT and Shocker NXT were not the end of the Impulse.
Why is the Impulse pressure balanced poppet valve a big deal?
Most poppet valves are pushed closed by the gas used to fire the marker. At the pressure ranges needed to obtain efficient operation (in terms of shots per tank fill) these valves must be struck fairly hard in order to knock them open and fire a paintball. The balanced valve in the Impulse also uses air-pressure to counter-act the pressure pushing it closed. It opens with little force, regardless of the pressure it is holding back. The balanced valve requires so little force to open that on prototype marker one of our engineers was actually able to fire the marker by pushing the valve open with his little finger. Since the valve takes less force to open, the Impulse is not shaken by the recoil of a hard hitting heavy hammer or ram.
Is the small part sticking out under the Impulse barrel a volume chamber?
No. The fire valve housing is an integral part of the pressure balanced poppet valve. The tail end of the valve is exposed to outside air through a passage in the center of the housing. The difference in pressure between the gas inside the valve, and the outside atmosphere is what provides the balancing force for the valve.
What is the advantage of dual-stage regulation?
The best pressure for firing a paintball and getting maximum air efficiency is not necessarily the best pressure to drive the firing piston which closes the bolt and opens the poppet valve. By regulating these gas supplies separately, each can be optimized for its own function. The Impulse uses approximately 50 psi to drive its firing piston. Compared to competing brand markers that drive pneumatic rams or hammers at 120 psi or more, this pressure reduction means that the Impulse bolt does not strike paint as hard, nor does it cause appreciable recoil or kick. This ultra-low force piston is only possible with the combination of the pressure balanced valve and dual-stage regulation.
Where are the Impulse's regulators and how are they adjusted?
Both the primary and second-stage regulators for the Impulse are built into small rectangular cartridges housed inside the grip frame. They are adjusted using allen-wrenches through the Impulse control panel - a rubber panel on the back of the grip frame. The modular design of the regulators also makes them quite simple to remove, inspect and clean or repair.
If the regulators are in the grip frame, what is in the foregrip?
The Impulse foregrip is an over-sized expanded volume chamber for the pressure balanced poppet valve. It provides a buffering reservoir of gas immediately adjacent to the valve, to prevent velocity drop-off under rapid fire. The bottom of the foregrip also contains an integrated relief valve to protect the Impulse from over-pressurization in case of a compressed air system regulator failure.
Can an aftermarket regulator be screwed in place of the foregrip, bypassing the primary Impulse regulator?
No, the Impulse foregrip does not use an ASA connection to attach to the marker body. A customized adapter and additional modifications would be required to use a different regulator.
The Impulse has no hoses on the outside, but what about the inside?
The Impulse has no hoses on the inside either. Compressed air is routed through the regulators, grip frame and body via channels machined within the aluminum walls of those parts. A pair of stainless steel transfer linkages route gas from the grip frame into the body.
Why is the Impulse firing piston air buffered?
By restricting gas flow vented from the firing piston, an air pressure buffer is created, slowing the piston and bolt as they near the end of their stroke. By slowing these parts, rather than letting them slam to an abrupt halt on impact with the valve, recoil is further eliminated from the Impulse's firing cycle.
What kind of HPA system should be used with the Impulse?
The Impulse will perform optimally with a compressed air system delivering between 600 and 900 psi. “Low-Output” compressed air systems outputting 400 psi, are not recommended, as they may not react fast enough to maintain consistent pressure under high rates of fire.
Will the Impulse run on CO2?
The Impulse was designed from day one to run on compressed air only. The integrated relief valve that protects the Impulse from HPA regulator failure also protects it from the pressure spikes related to CO2, so although the marker is not designed for CO2 use, it is protected from CO2 related pressure damage.
Why is an integrated relief valve important?
Increasingly, compressed air system some manufacturers (not Smart Parts) save money by neglecting to include output-pressure burst disks or relief valves in their products. If such an unprotected air system should develop an internal leak, it could deliver full tank pressure to a marker. The Impulse's built-in relief valve protects the marker's solenoid valve seals and other components that could otherwise be damaged by over-pressurization.
Does the Impulse use a spoopet valve?
No. The Impulse has a pressure balanced poppet valve. Internet rumors have suggested that Smart Parts was soon to release a marker with a valve that was a hybrid of spool and poppet valve designs. These rumors were not true. The Impulse is a poppet valve marker. Although it is not a spool valve, the new Impulse valve core does share a feature in common with the some Smart Parts spool valves designs – a tail. The tail end of the valve core is exposed to the outside air, the same as the pin end. This allows the gas pressure in the Impulse valve to press equally in both directions, resulting in a balanced valve that requires very little force to open.
Is the Impulse compatible with integrated air accessories for the Luxe from DLX Technology Group?
No. Although the Impulse bottom-line ASA and optional drop spacer rail work similar to those components on a Luxe, placement of their air ports is different, due to the requirements of the regulators placed within the grip.
Is the Impulse battery strong enough to get through a full weekend of paintball?
That really depends how much you shoot in a weekend. A fully charged Impulse battery will power the marker for approximately 100,000 shots under optimal conditions.
How long does it take the Impulse battery to charge?
Approximately 20 to 30 minutes. Charging time is affected by temperature, and battery discharge level.
What if there isn't time to charge the battery?
A second Lithium Polymer battery is included with the Impulse, and the battery side of the grip frame features Smart Parts quick grip snaps. The grip can be opened almost instantly without tools, and the low battery exchanged for a full battery in a matter of seconds.
What countries will the Impulse charger work in?
The Impulse charger is designed for universal operation with 110 or 220 volt AC wall outlets in most countries of the world. Prong adapters may be required outside of the US, Canada or Mexico.
Does the Impulse have a “Cricket” board?
No, the Impulse uses trigger-based programming with multi-colored LED feedback through the power button on the rear of its grip frame.
Is the Impulse circuit board tournament legal?
Yes, the Impulse features firing modes specifically designed to comply with the rules of all the current leading tournament series, and can be upgraded by Smart Parts techs, in case of a rules change. Additional scenario and recreational modes such as multi-shot burst, and Billy Ball are also included. The Impulse features a tournament lock button on the circuit board, that prevents mode changes from being made on the field.
If the grip opens without tools for a battery change, can't a player open it to access the tournament lock during a game?
No. The left side of the grip opens with quick-snap connectors for fast battery changes. The right side is secured with button-head screws that require an allen-wrench for removal. The field-lock button is on the right side of the Impulse circuit board, and can not be accessed without tools.
What type of ball detents does the Impulse use?
Rubber nubbin style detents. The detents are located behind the Vision eye covers.
Why does the Impulse have a two-piece body?
The two piece body allows the electronics of the Vision anti-chop system to remain completely internal without bolt-on wire/eye covers, and provides machining access for the internal gas passages used by the Impulse's hose-free design. It also allows for some interesting parts color combination possibilities and unusual feature upgrades.
What barrel thread pattern does the Impulse use?
The same thread pattern that was introduced with the Classic Impulse. Because this is now the thread pattern used on all Smart Parts markers, it is now simply referred to as Smart Parts threading.
How much does the Impulse weigh?
Weight of the Impulse is approximately 2.1 pounds.
Can the Impulse be upgraded with a tapeworm mod?
The Tapeworm Mod was a popular upgrade for the Classic Impulse, however it is not necessary on the new Impulse because it already features dual-stage regulation.
If spool valves are so great, why make a poppet valve marker?
Some players like the feel of a spool valve marker, while some prefer a poppet. Regardless of their preference, all players are looking for performance – that's where the Impulse delivers.
Does the release of the new Impulse mark the end of the Shocker product line?
No. In fact, this new product release proves that the Shocker SFT and Shocker NXT were not the end of the Impulse.
Why is the Impulse pressure balanced poppet valve a big deal?
Most poppet valves are pushed closed by the gas used to fire the marker. At the pressure ranges needed to obtain efficient operation (in terms of shots per tank fill) these valves must be struck fairly hard in order to knock them open and fire a paintball. The balanced valve in the Impulse also uses air-pressure to counter-act the pressure pushing it closed. It opens with little force, regardless of the pressure it is holding back. The balanced valve requires so little force to open that on prototype marker one of our engineers was actually able to fire the marker by pushing the valve open with his little finger. Since the valve takes less force to open, the Impulse is not shaken by the recoil of a hard hitting heavy hammer or ram.
Is the small part sticking out under the Impulse barrel a volume chamber?
No. The fire valve housing is an integral part of the pressure balanced poppet valve. The tail end of the valve is exposed to outside air through a passage in the center of the housing. The difference in pressure between the gas inside the valve, and the outside atmosphere is what provides the balancing force for the valve.
What is the advantage of dual-stage regulation?
The best pressure for firing a paintball and getting maximum air efficiency is not necessarily the best pressure to drive the firing piston which closes the bolt and opens the poppet valve. By regulating these gas supplies separately, each can be optimized for its own function. The Impulse uses approximately 50 psi to drive its firing piston. Compared to competing brand markers that drive pneumatic rams or hammers at 120 psi or more, this pressure reduction means that the Impulse bolt does not strike paint as hard, nor does it cause appreciable recoil or kick. This ultra-low force piston is only possible with the combination of the pressure balanced valve and dual-stage regulation.
Where are the Impulse's regulators and how are they adjusted?
Both the primary and second-stage regulators for the Impulse are built into small rectangular cartridges housed inside the grip frame. They are adjusted using allen-wrenches through the Impulse control panel - a rubber panel on the back of the grip frame. The modular design of the regulators also makes them quite simple to remove, inspect and clean or repair.
If the regulators are in the grip frame, what is in the foregrip?
The Impulse foregrip is an over-sized expanded volume chamber for the pressure balanced poppet valve. It provides a buffering reservoir of gas immediately adjacent to the valve, to prevent velocity drop-off under rapid fire. The bottom of the foregrip also contains an integrated relief valve to protect the Impulse from over-pressurization in case of a compressed air system regulator failure.
Can an aftermarket regulator be screwed in place of the foregrip, bypassing the primary Impulse regulator?
No, the Impulse foregrip does not use an ASA connection to attach to the marker body. A customized adapter and additional modifications would be required to use a different regulator.
The Impulse has no hoses on the outside, but what about the inside?
The Impulse has no hoses on the inside either. Compressed air is routed through the regulators, grip frame and body via channels machined within the aluminum walls of those parts. A pair of stainless steel transfer linkages route gas from the grip frame into the body.
Why is the Impulse firing piston air buffered?
By restricting gas flow vented from the firing piston, an air pressure buffer is created, slowing the piston and bolt as they near the end of their stroke. By slowing these parts, rather than letting them slam to an abrupt halt on impact with the valve, recoil is further eliminated from the Impulse's firing cycle.
What kind of HPA system should be used with the Impulse?
The Impulse will perform optimally with a compressed air system delivering between 600 and 900 psi. “Low-Output” compressed air systems outputting 400 psi, are not recommended, as they may not react fast enough to maintain consistent pressure under high rates of fire.
Will the Impulse run on CO2?
The Impulse was designed from day one to run on compressed air only. The integrated relief valve that protects the Impulse from HPA regulator failure also protects it from the pressure spikes related to CO2, so although the marker is not designed for CO2 use, it is protected from CO2 related pressure damage.
Why is an integrated relief valve important?
Increasingly, compressed air system some manufacturers (not Smart Parts) save money by neglecting to include output-pressure burst disks or relief valves in their products. If such an unprotected air system should develop an internal leak, it could deliver full tank pressure to a marker. The Impulse's built-in relief valve protects the marker's solenoid valve seals and other components that could otherwise be damaged by over-pressurization.
Does the Impulse use a spoopet valve?
No. The Impulse has a pressure balanced poppet valve. Internet rumors have suggested that Smart Parts was soon to release a marker with a valve that was a hybrid of spool and poppet valve designs. These rumors were not true. The Impulse is a poppet valve marker. Although it is not a spool valve, the new Impulse valve core does share a feature in common with the some Smart Parts spool valves designs – a tail. The tail end of the valve core is exposed to the outside air, the same as the pin end. This allows the gas pressure in the Impulse valve to press equally in both directions, resulting in a balanced valve that requires very little force to open.
Is the Impulse compatible with integrated air accessories for the Luxe from DLX Technology Group?
No. Although the Impulse bottom-line ASA and optional drop spacer rail work similar to those components on a Luxe, placement of their air ports is different, due to the requirements of the regulators placed within the grip.
Is the Impulse battery strong enough to get through a full weekend of paintball?
That really depends how much you shoot in a weekend. A fully charged Impulse battery will power the marker for approximately 100,000 shots under optimal conditions.
How long does it take the Impulse battery to charge?
Approximately 20 to 30 minutes. Charging time is affected by temperature, and battery discharge level.
What if there isn't time to charge the battery?
A second Lithium Polymer battery is included with the Impulse, and the battery side of the grip frame features Smart Parts quick grip snaps. The grip can be opened almost instantly without tools, and the low battery exchanged for a full battery in a matter of seconds.
What countries will the Impulse charger work in?
The Impulse charger is designed for universal operation with 110 or 220 volt AC wall outlets in most countries of the world. Prong adapters may be required outside of the US, Canada or Mexico.
Does the Impulse have a “Cricket” board?
No, the Impulse uses trigger-based programming with multi-colored LED feedback through the power button on the rear of its grip frame.
Is the Impulse circuit board tournament legal?
Yes, the Impulse features firing modes specifically designed to comply with the rules of all the current leading tournament series, and can be upgraded by Smart Parts techs, in case of a rules change. Additional scenario and recreational modes such as multi-shot burst, and Billy Ball are also included. The Impulse features a tournament lock button on the circuit board, that prevents mode changes from being made on the field.
If the grip opens without tools for a battery change, can't a player open it to access the tournament lock during a game?
No. The left side of the grip opens with quick-snap connectors for fast battery changes. The right side is secured with button-head screws that require an allen-wrench for removal. The field-lock button is on the right side of the Impulse circuit board, and can not be accessed without tools.
What type of ball detents does the Impulse use?
Rubber nubbin style detents. The detents are located behind the Vision eye covers.
Why does the Impulse have a two-piece body?
The two piece body allows the electronics of the Vision anti-chop system to remain completely internal without bolt-on wire/eye covers, and provides machining access for the internal gas passages used by the Impulse's hose-free design. It also allows for some interesting parts color combination possibilities and unusual feature upgrades.